Diferencias

Muestra las diferencias entre dos versiones de la página.

--- para_configurar_ispconfig [2015/07/13 18:36] – jlameiro
+++ para_configurar_ispconfig [2015/07/16 13:21] – jlameiro
@@ Línea 9: / Línea 9: @@
 Contenido:
-. Change The Default Shell.
+[[para_configurar_ispconfig#1. Change The Default Shell.|1. Change The Default Shell.]]
-. Synchronize the System Clock.
-. Install Postfix, Dovecot, MySQL, phpMyAdmin, rkhunter, binutils.
+[[para_configurar_ispconfig#2. Synchronize the System Clock.|2. Synchronize the System Clock.]]
-. Install Apache2, PHP5, phpMyAdmin, FCGI, suExec, Pear, And mcrypt.
-.1. Xcache.
+[[para_configurar_ispconfig#3. Install Postfix, Dovecot, MySQL, phpMyAdmin, rkhunter, binutils.|3. Install Postfix, Dovecot, MySQL, phpMyAdmin, rkhunter, binutils.]]
-.2. PHP-FPM.
-. Install PureFTPd And Quota.
+[[para_configurar_ispconfig#4. Install Apache2, PHP5, phpMyAdmin, FCGI, suExec, Pear, And mcrypt.|4. Install Apache2, PHP5, phpMyAdmin, FCGI, suExec, Pear, And mcrypt.]]
+[[para_configurar_ispconfig#4.1. Xcache.|4.1. Xcache.]]
+[[para_configurar_ispconfig#4.2. PHP-FPM.|4.2. PHP-FPM.]]
+[[para_configurar_ispconfig#5. Install PureFTPd And Quota.|5. Install PureFTPd And Quota.]]
+[[para_configurar_ispconfig#6. Install Vlogger, Webalizer, And AWstats.|6. Install Vlogger, Webalizer, And AWstats.]]
+[[para_configurar_ispconfig#7. Install fail2ban.|7. Install fail2ban.]]
+[[para_configurar_ispconfig#8. Install ISPConfig 3.|8. Install ISPConfig 3.]]
+[[para_configurar_ispconfig#9. ISPConfig 3 Manual.|9. ISPConfig 3 Manual.]]
+[[para_configurar_ispconfig#10. Warning.|10. Warning.]]
-**1. Change The Default Shell.**
+=== 1. Change The Default Shell. ===
 /bin/sh is a symlink to /bin/dash, however we need /bin/bash, not /bin/dash. Therefore we do this:
@@ Línea 27: / Línea 43: @@
 If you don't do this, the ISPConfig installation will fail.
-**2. Synchronize the System Clock.**
+=== 2. Synchronize the System Clock. ===
 Como es un contenedor para establecer el uso horario y demás empleamos el siguiente comando:
@@ Línea 33: / Línea 49: @@
   dpkg-reconfigure tzdata
-**3. Install Postfix, Dovecot, MySQL, phpMyAdmin, rkhunter, binutils.**
+=== 3. Install Postfix, Dovecot, MySQL, phpMyAdmin, rkhunter, binutils. ===
 We can install Postfix, Dovecot, MySQL, rkhunter, and binutils with a single command:
@@ Línea 94: / Línea 110: @@
 netstat -tap | grep mysql
 </code>
-**4. Install Apache2, PHP5, phpMyAdmin, FCGI, suExec, Pear, And mcrypt.**
+=== 4. Install Apache2, PHP5, phpMyAdmin, FCGI, suExec, Pear, And mcrypt. ===
 Apache2, PHP5, phpMyAdmin, FCGI, suExec, Pear, and mcrypt can be installed as follows:
@@ Línea 151: / Línea 167: @@
 /etc/init.d/apache2 restart
 </code>
-**4.1. Xcache.**
+=== 4.1. Xcache. ===
 Xcache is a free and open PHP opcode cacher for caching and optimizing PHP intermediate code. It's similar to other PHP opcode cachers, such as eAccelerator and APC. It is strongly recommended to have one of these installed to speed up your PHP page.
@@ Línea 163: / Línea 179: @@
 /etc/init.d/apache2 restart
 </code>
-**4.2. PHP-FPM.**
+=== 4.2. PHP-FPM. ===
 Starting with ISPConfig 3.0.5, there is an additional PHP mode that you can select for usage with Apache: PHP-FPM.
@@ Línea 176: / Línea 192: @@
 /etc/init.d/apache2 restart
 </code>
-**5. Install PureFTPd And Quota.**
+=== 5. Install PureFTPd And Quota. ===
 PureFTPd and quota can be installed with the following command:
@@ Línea 249: / Línea 265: @@
 /dev/sr0        /media/cdrom0   udf,iso9660 user,noauto     0       0
 </file>
+=== 6. Install Vlogger, Webalizer, And AWstats. ===
+Vlogger, webalizer, and AWstats can be installed as follows:
+<code>
+apt-get install vlogger webalizer awstats geoip-database libclass-dbi-mysql-perl
+</code>
+Open /etc/cron.d/awstats afterwards...
+<code>
+nano /etc/cron.d/awstats
+</code>
+... and comment out everything in that file:
+<file>
+#MAILTO=root
+#*/10 * * * * www-data [ -x /usr/share/awstats/tools/update.sh ] && /usr/share/awstats/tools/update.sh
+# Generate static reports:
+#10 03 * * * www-data [ -x /usr/share/awstats/tools/buildstatic.sh ] && /usr/share/awstats/tools/buildstatic.sh
+</file>
+=== 7. Install fail2ban. ===
+This is optional but recommended, because the ISPConfig monitor tries to show the log:
+<code>
+apt-get install fail2ban
+</code>
+To make fail2ban monitor PureFTPd and Dovecot, create the file /etc/fail2ban/jail.local:
+<code>
+nano /etc/fail2ban/jail.local
+</code>
+<file>
+[pureftpd]
+enabled  = true
+port     = ftp
+filter   = pureftpd
+logpath  = /var/log/syslog
+maxretry = 3
+[dovecot-pop3imap]
+enabled = true
+filter = dovecot-pop3imap
+action = iptables-multiport[name=dovecot-pop3imap, port="pop3,pop3s,imap,imaps", protocol=tcp]
+logpath = /var/log/mail.log
+maxretry = 5
+[sasl]
+enabled  = true
+port     = smtp
+filter   = sasl
+logpath  = /var/log/mail.log
+maxretry = 3
+</file>
+Then create the following two filter files:
+<code>
+nano /etc/fail2ban/filter.d/pureftpd.conf
+</code>
+<file>
+[Definition]
+failregex = .*pure-ftpd: \(.*@<HOST>\) \[WARNING\] Authentication failed for user.*
+ignoreregex =
+</file>
+<code>
+nano /etc/fail2ban/filter.d/dovecot-pop3imap.conf
+</code>
+<file>
+[Definition]
+failregex = (?: pop3-login|imap-login): .*(?:Authentication failure|Aborted login \(auth failed|Aborted login \(tried to use disabled|Disconnected \(auth failed|Aborted login \(\d+ authentication attempts).*rip=(?P<host>\S*),.*
+ignoreregex =
+</file>
+Restart fail2ban afterwards:
+<code>
+/etc/init.d/fail2ban restart
+</code>
+=== 8. Install ISPConfig 3. ===
+To install ISPConfig 3 from the latest released version, do this:
+<code>
+cd /tmp
+wget http://www.ispconfig.org/downloads/ISPConfig-3-stable.tar.gz
+tar xfz ISPConfig-3-stable.tar.gz
+cd ispconfig3_install/install/
+</code>
+The next step is to run
+<code>
+php -q install.php
+</code>
+This will start the ISPConfig 3 installer. The installer will configure all services like Postfix, Dovecot, etc. for you. A manual setup as required for ISPConfig 2 (perfect setup guides) is not necessary.
+<file>
+--------------------------------------------------------------------------------
+ _____ ___________   _____              __ _         ____
+|_   _/  ___| ___ \ /  __ \            / _(_)       /__  \
+  | | \ `--.| |_/ / | /  \/ ___  _ __ | |_ _  __ _    _/ /
+  | |  `--. \  __/  | |    / _ \| '_ \|  _| |/ _` |  |_ |
+ _| |_/\__/ / |     | \__/\ (_) | | | | | | | (_| | ___\ \
+ \___/\____/\_|      \____/\___/|_| |_|_| |_|\__, | \____/
+                                              __/ |
+                                             |___/
+--------------------------------------------------------------------------------
+>> Initial configuration
+Operating System: Debian or compatible, unknown version.
+</file>
+Following will be a few questions for primary configuration so be careful.
+Default values are in [brackets] and can be accepted with .
+Tap in "quit" (without the quotes) to stop the installer.
+Select language (en,de) [en]: <-- ENTER
+Installation mode (standard,expert) [standard]: <-- ENTER
+Full qualified hostname (FQDN) of the server, eg server1.domain.tld  [server1.example.com]: <-- ENTER
+MySQL server hostname [localhost]: <-- ENTER
+MySQL root username [root]: <-- ENTER
+MySQL root password []: <-- yourrootsqlpassword
+MySQL database to create [dbispconfig]: <-- ENTER
+MySQL charset [utf8]: <-- ENTER
+Country Name (2 letter code) [AU]: <-- ENTER
+State or Province Name (full name) [Some-State]: <-- ENTER
+Locality Name (eg, city) []: <-- ENTER
+Organization Name (eg, company) [Internet Widgits Pty Ltd]: <-- ENTER
+Organizational Unit Name (eg, section) []: <-- ENTER
+Common Name (e.g. server FQDN or YOUR name) []: <-- ENTER
+Email Address []: <-- ENTER
+ISPConfig Port [8080]: <-- ENTER
+Do you want a secure (SSL) connection to the ISPConfig web interface (y,n) [y]: <-- ENTER
+The installer automatically configures all underlying services, so no manual configuration is needed.
+Afterwards you can access ISPConfig 3 under http(s)://server1.example.com:8080/ or http(s)://192.168.0.100:8080/ ( http or https depends on what you chose during installation). Log in with the username admin and the password admin (you should change the default password after your first login):
+=== 9. ISPConfig 3 Manual. ===
+In order to learn how to use ISPConfig 3, I strongly recommend to https://www.howtoforge.com/download-the-ispconfig-3-manual
+=== 10. Warning. ===
+En algunas ocasiones, el enlace entre el ISPConfig y la aplicación phpMyadmin, no es creado por el proceso de instalación, para lo cual se requiere crear de manera manual, dicho enlace:
+En etc/apache2/conf.d agregar enlace simbolico a etc/phpmyadmin/apache.conf
 Tomado de: https://www.howtoforge.com/perfect-server-debian-wheezy-apache2-bind-dovecot-ispconfig-3